FT 22 is a fun flyer that beginners and advanced pilots can enjoy together. This 2 sheet design is the first of FT Simple Series, which uses the FT Elements Simple Firewall, instead of a power pod. Considering the sleek look of the FT-22 and it’s excessive elevon control surface throws, the Flite test FT-22 is actually a very forgiving platform that we would even go as far to say that it would be a great first plane/trainer. This is an excellent introduction to bank and yank style flying. With a smaller motor and battery, this plane could easily be flown indoors in as small as a 2 court gymnasium and with a heavier set up it penetrates well enough to be flown in light to moderate wind.
Easy to build:
FT 22 raptor is easy to build and can be build over an hour. This model is so light weight that you do not need expensive electronic to operate the aircraft. This is specially designed to perform 3d acrobats in air. Excellent model to start building depron models or flite test models. We cut the designs in laser cutter to give you the best flying experience. Buy it online from RCKolkata and assemble at your own convenience. We also provide online offline support for this product. Book your free slot to understand the basic parts and how to build the model. Buy FT model in India
Easy to Fly:
The FT 22 model is designed and created by flite test. This Flite test Speed kit is made in India brought to you by RCKolkata. Being a 2 channel raptor it is easy to fly compared to other raptors and jets available. Start flying the raptor with FT22.
Mini Guinea is a small twin with lot of scope. There is so much versatility which is insane!
If you are a beginner looking to build your first twin or you are an advanced pilot looking for a very small and versatile platform, Mini Guinea can do wonders!
Using a differential thrust through brushless motors the Mini Guinea is capable of a wide variety of maneuvers such as flat spins, pin wheels, and even harriers.
The under cambered wing tips give this aircraft a very wide speed envelope that will allow anything from slow high alpha flight to fast sport flying.
Mini guinea was designed by flite test
FT Viggen is a jet that can slow down to a crawl and not stall. Yet it can be fast and track like an arrow. It has a precise and locked in feel. These characteristics make the FT Viggen a great EDF trainer. The fact that you don’t have to fly fast all the time and be afraid of stalling makes the FT Viggen so enjoyable to fly. This plane will teach you about the nature and feel of an EDF power system in a safe and controlled manner. Designed by flite test we bring flite test models and speed kit in India.
Easy to build and fly:
FT Viggen is designed with multiple options of power systems. Fly with simple Firewall motor mount or with thrust vector.
Easy to give various color combination:
The FT Viggen can be given any color, see the military pattern in sticker options section. However, consider weight before installing stickers.
5 MM Depron Sheet Foamboard
Depron is a brand name for Extruded Polystyrene (XPS) closed cell foam in 5 MM sheet form, it is a fantastic medium for building model aircraft, and also a popular medium for architectural model building, as well as model boats and prototype design. XPS foam is stronger than traditional EPS Themocol and can be further strengthened with carbon fiber or wood strips. Due to the characters many hobbyist use the 5 MM foam board to make aircraft models. All the flite test designs are based on the 5 MM depron sheets.
Strength to weight ratio and rigidity is perfect for RC airplanes
Easy to cut with precision by knife
Sheets are flat with smooth finish
Sheets bent while stocked, give a flat surface and it will be flat and straight overnight.
1) 100% brand new and high quality.
2) For: Water-proof and dust-proof, suitable for all-weather conditions.
3) Model: Any depron airplane model can be made.
Thickness : 5 MM
Brand : Simplesky
Color : White
Product Group : Building Material
Product Type Name : TOYS_AND_GAMES
RC Airplane Depron in India
Depron with 5 MM thickness for airplane model building.
What is glue stick
Glue stick is a form of thermoplastic adhesive that is commonly sold as solid cylindrical sticks of various diameters designed to be applied using a hot glue gun. The gun uses a continuous-duty heating element to melt the plastic glue, which the user pushes through the gun either with a mechanical trigger mechanism on the gun, or with direct finger pressure. The glue squeezed out of the heated nozzle is initially hot enough to burn and even blister skin. The glue is tacky when hot, and solidifies in a few seconds to one minute. Hot melt adhesives can also be applied by dipping or spraying.
These Glue sticks are of import quality. Imported from Taiwan.
The Glue sticks are light weight and hold a good strength.
Specially designed to work on hobby related products.
Tried and tested to work on foam-boards, these glue guns are excellent for foam-board rc airplanes.
Glue stick can be used for various purpose. This can be used for paper and non paper materials hence ideal for the foam board build and foam board kits.
Hobby Hot Glue:
The glue stick is specially made to work with hobby related products.
Push Rods (1 quantity = 1 Centimeter)
Ideal push rods for building rc airplanes, drones, boats. These are used to connect from the servo to control horn. Used to push or pull the controls.
These rods can be used to link the control surface with servo. Our exclusive range of push rods provide you flexibility to choose the length of your linkage rod.
The rods can also be used for landing gear and reinforcements. These are high grade rods mixed with steel to protect from rusting. You can choose your own length.
1) New and high quality rods.
2) Partly steel to protect from rusting.
3) Top grade
Rc airplane or rc aircraft is made of balsa sheet due to its strength and light weight. All the professional rc airplanes are built of balsawood.
RC Simulator GOLD EDITION
Real Flight Simulator Phoenix Simulator, FMS, XTR, AEROFLY ( Hundreds of planes types, Helicopters and Quadcopters)
Only at rckolkata.com
This flight simulator package has 22 simulators in one CD. This comes with Crack Key. Very cheap and affordable.
This is a brand new and top quality product
Please Note: Serial number on the package that has DVD has to be used with one computer only. After installation and activating, serial number are important. Do not misplace the flight simulator number.
Following simulators are available with the pack
Real Flight G6.5, G5.5, Real Flight 4.5
Phoenix Flight 4.0
XTR Car simulator ( So there are 20 different modules)
The Drone simulator or video game in short can be installed in computer, PC or laptop and you can fly any Airplane, drone, boat, helicopter from the rc simulator. Easily installed and ready within 15-20 minutes.
Practicing in drone simulator or rc simulator is a recommended and an easy step to learn the hobby of rc airplanes, drones, boats, helicopters. Refer our beginners section.
Similar keywords – Rc flight simulator,simulator to learn rc flying, simulator for transmitter in India. Drone simulator. Video game for PC, airplane game
The Simple Cub is both easy to build and easy to fly. In its most simple format, 11 separate pieces of foam is all that is required to build this plane.
This makes for a build time under 2 hours. We took a great amount of inspiration from the Horizon Super Cub LP and the Blu Baby. Both are amazing designs that we all love and want to honor. The ability for the FT Simple cub to go from 3 channel (rudder, elevator, and throttle) to 4 channel (rudder, elevator, aileron, and throttle) without building a new wing. The aileron mod only takes 15 minutes to add and opens a world of options like flaperons and aerobatic flying. If dropping foam bombs for target practice is your fancy, the same servo will double as drop mechanisms while still keeping the great flight characteristics as the original 3 channel format. Your support, feedback, and passion for flight is the reason we are here today!
We are confident that this design is possibly the most rewarding to build, fly, and modify Flite test has created.
We bring Flite Test Depron Models to India, Built in India.
The Brushless Motor A2212/10 1400 KV provides excellent performance, quality, and dependability at an affordable price.
The 30A ESC has been engineered with heat dissipation in mind.
30A ESC is the most common esc which is used everywhere in every aircraft, be it a drone, multicopter, airplane or any other vehicle. The ESC are of good quality with heat dissipation which will help to reduce the intensity of heat while working. However, please keep the ESC in an airy compartment where the air intake is sufficient to cool off the ESC.
ESC is easy to use for new beginners and intermediate modelers; it simplifies the operation. Just need to connect and it is ready to perform.
Applicable to All Weather Conditions
The design allows the 30A ESC to be used in all conditions without any issue or damage caused
to the ESC. The Esc size is reasonable and can be easily placed and fitted.
The BRUSHLESS-MOTOR-1800KV A2212 provides excellent performance, quality, and dependability at an affordable price.
Imax B3 Pro Charger
Imax B3 Pro Charger is a simple and compact LiPoly balanace charger for 2~3s batteries. It features built in JST-XH balance plug ports and 3 LEDs to indicate charge status.
- Input voltage: AC 110V-240V
- Balance charge current: 850mA
- Display: Green & Red LED
- Case: Plastic
- Max charge power:10W
- Only charge for 2~3 series LiPo battery
Whats Included :
- IMAXRC B3 Compact Charger * 1
- Power Cord * 1
- Instruction manual * 1
A digital 6 Degrees of Freedom Sensor. It uses the popular MPU-6050 Sensor which includes both a 3 axis accelerator and a 3 axis gyroscope.
This is a low cost wireless video camera Kit. It includes a tiny video camera with inbuilt 2.4 Ghz transmitter.
The G.T. Power Servo Tester – CCPM Servo Consistency Master makes it easy to check the operation of your servo or esc without using a transmitter.
It is a very handy servo driver/tester that can test the consistency and set the centering for up to 3 servos simultaneously.
There are 3 modes to check servos or ESC:
- Manual mode: turn the knob with different speed, check the reaction time.
- Neutral mode: make the servo go back to the neutral point.
- Automatic “window wiper” mode: make the servo swing like a window wipers in the biggest angle.
- Connection with Servo
The following connection will be required.
By pressing the button on servo tester, you can select the mode. Servo will react accordingly.